A perfect Congo Ebola workflow guides you through safe sample receipt, inactivation, testing, and data reporting. Follow the outlined steps to protect staff, maintain integrity, and comply with international biosafety standards.

Laboratory technician in full PPE handling Ebola sample inside a biosafety cabinet in a Congo field lab
Laboratory technician in full PPE handling Ebola sample inside a biosafety cabinet in a Congo field lab

Why a Structured Workflow Matters

Working with Ebola samples demands strict biosafety controls. A clear workflow reduces accidental exposure and ensures reliable results. Beginners benefit from a visual roadmap that aligns with World Health Organization (WHO) recommendations.

Diagram showing the seven-step Congo Ebola workflow from sample receipt to data reporting
Diagram showing the seven-step Congo Ebola workflow from sample receipt to data reporting

Core Components of the Workflow

The workflow consists of four pillars: sample logistics, containment procedures, diagnostic assays, and documentation. Each pillar relies on trained personnel, appropriate equipment, and standard operating procedures (SOPs).

ComponentKey Requirement
Sample LogisticsCold chain, chain‑of‑custody forms
ContainmentBSL‑3 cabinet, PPE, decontamination
Diagnostic AssaysRT‑PCR kits, validated controls
DocumentationElectronic LIMS, audit trails

Step‑by‑Step Procedure

  1. Receive the shipment in a designated receiving area. Verify the manifest and inspect packaging for integrity.
  2. Transfer samples into a Class II biosafety cabinet (BSC) while wearing full PPE. Record the receipt time and temperature.
  3. Inactivate the specimens using a validated lysis buffer. Follow the manufacturer’s contact time precisely.
  4. Extract RNA using a column‑based kit inside the BSC. Include a negative extraction control.
  5. Set up RT‑PCR reactions according to the assay protocol. Run a positive control and a no‑template control.
  6. Analyze amplification curves and interpret results using the assay’s threshold criteria. Report any indeterminate outcomes for repeat testing.
  7. Enter results into the laboratory information management system (LIMS). Generate a secure report for the health authority and archive all raw data for 5 years.

Best Practices and Safety Checks

Always perform a pre‑shift safety briefing. Verify that all equipment is calibrated and that waste containers are properly labeled.

After each batch, decontaminate the BSC with an approved disinfectant and autoclave all disposable waste. Conduct quarterly biosafety drills to reinforce emergency procedures.

Monitoring, Review, and Continuous Improvement

Maintain a log of all incidents, near‑misses, and corrective actions. Review the workflow monthly with the biosafety officer to incorporate new guidelines.

Use performance metrics such as turnaround time and assay failure rate to identify bottlenecks. Adjust SOPs based on data trends and stakeholder feedback.

Frequently Asked Questions

What biosafety level is required for Ebola sample processing?

Ebola work must be performed at Biosafety Level 3 (BSL‑3) with a certified biosafety cabinet and full PPE.

Can I use a regular PCR machine for Ebola testing?

Yes, provided the machine is located inside the BSL‑3 suite and the assay has been validated for Ebola RNA detection.

How long should I retain Ebola testing records?

International guidelines recommend retaining raw data, reports, and audit logs for at least five years.